View source for Enthalpy

{{distinguish|Entropy}}
{{Redirect|Heat content|the term in oceanography|Ocean heat content}}
{{Thermodynamics |potentials}}
'''Enthalpy''' {{IPAc-en|ˈ|ɛ|n|θ|əl|p|i|audio=en-US-enthalpy.ogg}}, a property of a [[thermodynamic system]], is equal to the system's [[internal energy]] plus the product of its pressure and volume.<ref>{{cite web |url=http://www.oxforddictionaries.com/us/definition/american_english/enthalpy |title=Oxford Living Dictionaries |accessdate=2018-02-19 |url-status=live |archiveurl=https://web.archive.org/web/20160817085918/http://www.oxforddictionaries.com/us/definition/american_english/enthalpy |archivedate=2016-08-17 }}</ref><ref>{{cite web |url=http://goldbook.iupac.org/html/E/E02141.html |title=IUPAC Gold Book. Enthalpy, H |accessdate=2018-02-19}}</ref> In a system enclosed so as to prevent mass transfer, for processes at constant pressure, the heat absorbed or released equals the change in enthalpy.

The unit of measurement for enthalpy in the [[International System of Units]] (SI) is the [[joule]]. Other historical conventional units still in use include the [[British thermal unit|British thermal unit (BTU)]] and the [[calorie]].

Enthalpy comprises a system's [[internal energy]], which is the energy required to create the system, plus the amount of [[work (physics)|work]] required to make room for it by displacing its [[environment (systems)|environment]] and establishing its volume and pressure.<ref>{{cite book|first=Mark W. |last=Zemansky |date=1968 |title=Heat and Thermodynamics |url=https://archive.org/details/heatthermodynami0000zema |url-access=registration |chapter=Chapter 11 |edition=5th |page=[https://archive.org/details/heatthermodynami0000zema/page/275 275] |publisher=McGraw-Hill |location=New York, NY}}</ref>

Enthalpy is defined as a [[state function]] that depends only on the prevailing equilibrium state identified by the system's internal energy, pressure, and volume. It is an [[Intensive and extensive properties|extensive]] quantity.

Change in enthalpy (ΔH) is the preferred expression of system energy change in many chemical, biological, and physical measurements at constant pressure, because it simplifies the description of [[energy transfer]]. In a system enclosed so as to prevent matter transfer, at constant pressure, the enthalpy change equals the energy transferred from the environment through [[heat]] transfer or work other than expansion work.

The total enthalpy, ''H'', of a system cannot be measured directly. The same situation exists in classical mechanics: only a change or difference in energy carries physical meaning. Enthalpy itself is a thermodynamic potential, so in order to measure the enthalpy of a system, we must refer to a defined reference point; therefore what we measure is the change in enthalpy, Δ''H''. The Δ''H'' is a positive change in [[endothermic]] reactions, and negative in heat-releasing [[exothermic]] processes.

For processes under constant pressure, Δ''H'' is equal to the change in the internal energy of the system, plus the [[Work (thermodynamics)#Pressure–volume work|pressure-volume work]] p ΔV done by the system on its surroundings (which is > 0 for an expansion and < 0 for a contraction).<ref>{{cite book|first1=G. J. |last1=Van Wylen |first2=R. E. |last2=Sonntag |date=1985 |title=Fundamentals of Classical Thermodynamics |chapter=Section 5.5 |edition=3rd |publisher=John Wiley & Sons |location=New York |isbn=978-0-471-82933-1}}</ref> This means that the change in enthalpy under such conditions is the heat absorbed or released by the system through a chemical reaction or by external heat transfer. Enthalpies for chemical substances at constant pressure usually refer to [[standard state]]: most commonly 1 bar pressure. Standard state does not, strictly speaking, specify a temperature (see [[standard state]]), but expressions for enthalpy generally reference the standard heat of formation at 25&nbsp;°C.

Enthalpy of [[ideal gas]]es and incompressible solids and liquids does not depend on pressure, unlike [[entropy]] and [[Gibbs free energy|Gibbs energy]]. Real materials at common temperatures and pressures usually closely approximate this behavior, which greatly simplifies enthalpy calculation and use in practical designs and analyses.

==History==
The word ''enthalpy'' was coined relatively late, in the early ''20th century'', in analogy with the 19th-century terms ''[[energy]]'' (introduced in its modern sense by [[Thomas Young (scientist)|Thomas Young]] in 1802) and ''[[entropy]]'' (coined in analogy to ''energy'' by [[Rudolf Clausius]] in 1865).  Where ''energy'' uses the root of the Greek word {{lang|grc|ἔργον}} (ergon) "work" to express the idea of "work-content" and where ''entropy'' uses the Greek word {{lang|grc|τροπή}} (tropi) "transformation" to express the idea of "transformation-content", so by analogy, ''enthalpy'' uses the root of the Greek word {{lang|grc|θάλπος}} (thalpos) "warmth, heat"<ref>[http://www.perseus.tufts.edu/hopper/morph?l=qa%2Flpos&la=greek&can=qa%2Flpos0&prior=qalpno/s#lexicon θάλπος] in ''[[A Greek–English Lexicon]]''.</ref> to express the idea of "heat-content".
The term does in fact stand in for the older term "heat content",<ref>Howard (2002) quotes [[J. R. Partington]] in ''An Advanced Treatise on Physical Chemistry'' (1949) as saying that the function ''H'' was "usually called the heat content".</ref>
a term which is now mostly deprecated as misleading, as  {{mvar|dH}} refers to the amount of heat absorbed in a process at constant pressure only,<ref>{{cite book|first1=Ignacio |last1=Tinoco, Jr. |first2=Kenneth |last2=Sauer |first3=James C. |last3=Wang |date=1995 |title=Physical Chemistry |page=41 |edition=3rd |publisher=Prentice-Hall |isbn=978-0-13-186545-7}}</ref>
but not in the general case (when pressure is variable).<ref>{{cite book|first1=Keith J.|last1=Laidler |authorlink=Keith J. Laidler |first2=John H. |last2=Meiser |date=1982 |title=Physical Chemistry |page=53 |publisher=Benjamin/Cummings |isbn=978-0-8053-5682-3}}</ref>
[[Josiah Willard Gibbs]] used the term "a heat function for constant pressure" for clarity.<ref group=note>''The Collected Works of J. Willard Gibbs, Vol. I'' do not contain reference to the word enthalpy, but rather reference the "heat function for constant pressure". See: {{Cite book
|last1= Henderson|first1= Douglas|last2= Eyring|first2= Henry|last3= Jost|first3= Wilhelm
|title= Physical Chemistry: An Advanced Treatise
|publisher= Academic Press|year= 1967|page= 29
}}</ref>

Introduction of the concept of "heat content" {{mvar|H}} is associated with [[Benoît Paul Émile Clapeyron]] and [[Rudolf Clausius]] ([[Clausius–Clapeyron relation]], 1850).

The term ''enthalpy'' first appeared in print in 1909.<ref>{{cite journal |last1=Dalton |first1=J. P. |title=Researches on the Joule-Kelvin-effect, especially at low temperatures. I. Calculations for hydrogen |journal=Proceedings of the Section of Sciences (Koninklijke Akademie van Wetenschappen Te Amsterdam [Royal Academy of Sciences at Amsterdam]) |date=1909 |volume=11 (part 2) |pages=863–873 |url=https://www.biodiversitylibrary.org/item/49173#page/453/mode/1up|bibcode=1908KNAB...11..863D }} ; see p. 864, footnote (1).</ref> It is attributed to  [[Heike Kamerlingh Onnes]], who most likely introduced it orally the year before, at the first meeting of the Institute of Refrigeration in Paris.<ref>See:
* {{Cite book|last= Laidler|first1= Keith|authorlink= Keith J. Laidler|title= The World of Physical Chemistry|publisher= Oxford University Press|year= 1995|page= 110}}
* {{Cite journal |last= Van Ness|first= Hendrick C. |year= 2003 |title=''H'' Is for Enthalpy |journal= Journal of Chemical Education|volume= 80|issue= 6|pages= 486 |bibcode= 2003JChEd..80..486V|doi= 10.1021/ed080p486.1}}</ref>
It gained currency only in the 1920s, notably with the ''[[enthalpy–entropy chart|Mollier Steam Tables and Diagrams]]'', published in 1927.

Until the 1920s, the symbol {{mvar|H}} was used, somewhat inconsistently, for "heat" in general.
The definition of {{mvar|H}} as strictly limited to enthalpy or "heat content at constant pressure" was formally proposed by Alfred W. Porter in 1922.<ref>{{cite journal |last1=Porter |first1=Alfred W. |title=The generation and utilisation of cold. A general discussion. |journal=Transactions of the Faraday Society |date=1922 |volume=18 |pages=139–143 |url=https://babel.hathitrust.org/cgi/pt?id=njp.32101076787439;view=1up;seq=157 |doi=10.1039/tf9221800139}} ; see p. 140.</ref><ref name=Howard>
{{Cite journal
|doi= 10.1021/ed079p697 |last= Howard|first= Irmgard
|year= 2002
|title= ''H'' Is for Enthalpy, Thanks to Heike Kamerlingh Onnes and Alfred W. Porter
|journal= Journal of Chemical Education|volume= 79|issue= 6|pages= 697
|bibcode = 2002JChEd..79..697H
}}</ref>

==Formal definition==
The enthalpy of a thermodynamic system is defined as<ref name="Guggenheim">{{cite book |first=E. A. |last=Guggenheim |title=Thermodynamics |publisher=North-Holland Publishing Company |location=Amsterdam |date=1959}}</ref><ref>{{Cite book |author=Zumdahl, Steven S. |chapter=Thermochemistry |title=Chemistry |publisher=Cengage Learning |year=2008 |isbn=978-0-547-12532-9 |page=243 |chapter-url=https://books.google.com/books?id=LLWkH82PNbYC&pg=PA243 |url-status=live |archiveurl=https://web.archive.org/web/20131114034015/http://books.google.com/books?id=LLWkH82PNbYC&pg=PA243 |archivedate=2013-11-14|df=}}</ref>
: <math>H = U + p V,</math>
where
: <math>H</math> is enthalpy,
: <math>U</math> is the [[internal energy]] of the system,
: <math>p</math> is [[pressure]],
: <math>V</math> is the [[Volume (thermodynamics)|volume]] of the system.

Enthalpy is an [[extensive property]]. This means that, for homogeneous systems, the enthalpy is proportional to the size of the system. It is convenient to introduce the [[specific enthalpy]] <math>h = \frac{H}{m}</math>, where <math>m</math> is the [[mass]] of the system, or the molar enthalpy <math>H_\text{m} = \frac{H}{n}</math>, where <math>n</math> is the number of [[Mole (unit)|moles]] (<math>h</math> and <math>H_\text{m}</math> are [[intensive properties]]). For inhomogeneous systems the enthalpy is the sum of the enthalpies of the composing subsystems:
: <math>H = \sum_k H_k,</math>
where
: <math>H</math> is the total enthalpy of all the subsystems,
: <math>k</math> refers to the various subsystems,
: <math>H_k</math> refers to the enthalpy of each subsystem,
: <math>\sum_k H_k</math> refers to the sum of the enthalpies of all subsystems.

A closed system may lie in thermodynamic equilibrium in a static gravitational field, so that its pressure <math>p</math> varies continuously with altitude, while, because of the equilibrium requirement, its temperature <math>T</math> is invariant with altitude. (Correspondingly, the system's gravitational potential energy density also varies with altitude.) Then the enthalpy summation becomes an [[integral]]:
: <math>H = \int (\rho h) \, dV,</math>
where
: <math>\rho</math> ("[[rho]]") is [[density]] (mass per unit volume),
: <math>h</math> is the specific enthalpy (enthalpy per unit mass),
: <math>(\rho h)</math> represents the [[Energy density|enthalpy density]] (enthalpy per unit volume),
: <math>dV</math> denotes an [[infinitesimal]]ly small element of volume within the system, for example, the volume of an infinitesimally thin horizontal layer,
: <math>\int (\rho h) \, dV,</math> represents the sum of the enthalpies of all the elements of the volume.

The enthalpy of a closed homogeneous system is its [[Enthalpy#Cardinal functions|cardinal energy function]] <math>H(S, p)</math>, with natural state variables its entropy <math>S[p]</math> and its pressure <math>p</math>. A differential relation for it can be derived as follows. We start from the [[first law of thermodynamics]] for closed systems for an infinitesimal process:
: <math>dU = \delta Q - \delta W,</math>
where
: <math>\delta Q</math> is a small amount of heat added to the system,
: <math>\delta W</math> a small amount of work performed by the system.

In a homogeneous system in which only reversible, or quasi-static, processes are considered, the [[second law of thermodynamics]] gives <math>\delta Q = T\,dS</math>, with <math>T</math> the [[absolute temperature]] of the system. Furthermore, if only <math>pV</math> work is done, <math>\delta W = p\,dV</math>. As a result,

: <math>dU = T\,dS - p\,dV.</math>

Adding <math>d(pV)</math> to both sides of this expression gives

: <math>dU + d(pV) = T\,dS - p\,dV + d(pV),</math>

or

: <math>d(U + pV) = T\,dS + V\,dp.</math>

So

: <math>dH(S, p) = T\,dS + V\,dp.</math>

==Other expressions==
The above expression of ''dH'' in terms of entropy and pressure may be unfamiliar to some readers. However, there are expressions in terms of more familiar variables such as temperature and pressure:<ref name="Guggenheim" />{{rp|88}}<ref>{{cite book|first1=M. J. |last1=Moran |first2=H. N. |last2=Shapiro |title=Fundamentals of Engineering Thermodynamics |edition=5th |date=2006 |publisher=John Wiley & Sons |page=511}}</ref>

:<math>dH = C_p\,dT + V(1 - \alpha T)\,dp.</math>

Here ''C''<sub>''p''</sub> is the heat capacity at constant pressure and ''α'' is the coefficient of (cubic) thermal expansion:

:<math>\alpha = \frac{1}{V}\left(\frac{\partial V}{\partial T}\right)_p.</math>

With this expression one can, in principle, determine the enthalpy if ''C<sub>p</sub>'' and ''V'' are known as functions of ''p'' and ''T''.

Note that for an [[ideal gas]], ''αT''&nbsp;=&nbsp;1,<ref group=note><math>\alpha T=\frac{T}{V}\left(\frac{\partial (\frac{n R T}{P})}{\partial T}\right)_p = \frac{nRT}{PV} = 1</math></ref> so that

:<math>dH = C_p\,dT.</math>

In a more general form, the first law describes the internal energy with additional terms involving the [[chemical potential]] and the number of particles of various types. The differential statement for ''dH'' then becomes

:<math>dH = T\,dS + V\,dp + \sum_i \mu_i\,dN_i,</math>

where ''μ''<sub>''i''</sub> is the chemical potential per particle for an ''i''-type particle, and ''N''<sub>''i''</sub> is the number of such particles. The last term can also be written as {{nowrap|''μ<sub>i</sub>''&thinsp;''dn''<sub>''i''</sub>}} (with ''dn''<sub>''i''</sub> the number of moles of component ''i'' added to the system and, in this case, ''μ''<sub>''i''</sub> the molar chemical potential) or as {{nowrap|''μ''<sub>''i''</sub>&thinsp;''dm''<sub>''i''</sub>}} (with ''dm''<sub>''i''</sub> the mass of component ''i'' added to the system and, in this case, ''μ''<sub>''i''</sub> the specific chemical potential).

===Cardinal functions===

The enthalpy, {{math|''H''(''S''[''p''],''p'',{''N<sub>i</sub>''})}}, expresses the thermodynamics of a system in the ''energy-language'', or in the ''energy representation''. As a [[State function|function of state]], its arguments include both one intensive and several extensive [[state variable]]s. The state variables {{math|''S''[''p'']}}, {{math|''p''}}, and {{math|{''N<sub>i</sub>''}}} are said to be the ''natural state variables'' in this representation. They are suitable for describing processes in which they are experimentally controlled. For example, in an idealized process, {{math|''S''[''p'']}} and  {{math|''p''}} can be controlled by preventing heat and matter transfer by enclosing the system with a wall that is adiathermal and impermeable to matter, and by making the process infinitely slow, and by varying only the external pressure on the piston that controls the volume of the system. This is the basis of the so-called adiabatic approximation that is used in [[meteorology]].<ref>Iribarne, J.V., Godson, W.L. (1981). ''Atmospheric Thermodynamics'', 2nd edition, Kluwer Academic Publishers, Dordrecht, {{ISBN|90-277-1297-2}}, pp. 235–236.</ref>

Alongside the enthalpy, with these arguments, the other cardinal function of state of a thermodynamic system is its entropy, as a function, {{math|''S''[''p''](''H'',''p'',{''N<sub>i</sub>''})}}, of the same list of variables of state, except that the entropy, {{math|''S''[''p'']}}, is replaced in the list by the enthalpy, {{math|''H''}}. It expresses the ''entropy representation''. The state variables {{math|''H''}}, {{math|''p''}}, and {{math|{''N<sub>i</sub>''}}} are said to be the ''natural state variables'' in this representation. They are suitable for describing processes in which they are experimentally controlled. For example, {{math|''H''}} and {{math|''p''}} can be controlled by allowing heat transfer, and by varying only the external pressure on the piston that sets the volume of the system.<ref>Tschoegl, N.W. (2000). ''Fundamentals of Equilibrium and Steady-State Thermodynamics'', Elsevier, Amsterdam, {{ISBN|0-444-50426-5}}, p. 17.</ref><ref>Callen, H. B. (1960/1985), ''Thermodynamics and an Introduction to Thermostatistics'', (first edition 1960), second edition 1985, John Wiley & Sons, New York, {{ISBN|0-471-86256-8}}, Chapter 5.</ref><ref>Münster, A. (1970), Classical Thermodynamics, translated by E. S. Halberstadt, Wiley–Interscience, London, {{ISBN|0-471-62430-6}}, p. 6.</ref>

==Physical interpretation==
The ''U'' term can be interpreted as the energy required to create the system, and the ''pV'' term as the [[work (thermodynamics)|work]] that would be required to "make room" for the system if the pressure of the environment remained constant. When a system, for example, ''n'' [[Mole (unit)|moles]] of a gas of [[Volume (thermodynamics)|volume]] ''V'' at [[pressure]] ''p'' and [[temperature]] ''T'', is created or brought to its present state from [[absolute zero]], energy must be supplied equal to its internal energy ''U'' plus ''pV'', where ''pV'' is the [[Work (physics)|work]] done in pushing against the ambient (atmospheric) pressure.

In basic [[physics]] and [[statistical mechanics]] it may be more interesting to study the internal properties of the system and therefore the internal energy is used.<ref>{{cite book|first=F. |last=Reif |title=Statistical Physics |publisher=McGraw-Hill |location=London |date=1967}}</ref><ref>{{cite book|first1=C. |last1=Kittel |first2=H. |last2=Kroemer |title=Thermal Physics |publisher=Freeman |location=London |date=1980}}</ref> In basic [[chemistry]], experiments are often conducted at constant [[atmospheric pressure]], and the pressure-volume work represents an energy exchange with the atmosphere that cannot be accessed or controlled, so that Δ''H'' is the expression chosen for the [[heat of reaction]].

For a [[heat engine]] a change in its internal energy is the difference between the heat input and the [[Work (thermodynamics)#Pressure–volume work|pressure-volume work]] done by the working substance while a change in its enthalpy is the difference between the heat input and the work done by the engine:<ref>{{Cite book|title=Theoretische Physik|last=Bartelmann|first=Matthias|publisher=Springer Spektrum|year=2015|isbn=978-3-642-54617-4|location=|pages=1106–1108|quote=|via=}}</ref>
:<math>dH=\delta Q-\delta W</math>
where the work W done by the engine is:
:<math>W=-\oint pdV</math>

== Relationship to heat ==
In order to discuss the relation between the enthalpy increase and heat supply, we return to the first law for closed systems, with the physics sign convention: {{nowrap|1=''dU'' = ''δQ'' − ''δW''}}, where the heat ''δQ'' is supplied by conduction, radiation, and [[Joule heating]]. We apply it to the special case with a constant pressure at the surface. In this case the work term can be split into two contributions, the so-called ''pV'' work, given by {{nowrap|''p&thinsp;dV''}} (where here ''p'' is the pressure at the surface, ''dV'' is the increase of the volume of the system), and the so-called isochoric mechanical work ''δW′'', such as stirring by a shaft with paddles or by an externally driven magnetic field acting on an internal rotor. Cases of long range electromagnetic interaction require further state variables in their formulation, and are not considered here. So we write {{nowrap|1=''δW'' = ''p&thinsp;dV'' + ''δW′''}}. In this case the first law reads:

:<math>dU = \delta Q - p\,dV - \delta W'.</math>

Now,

:<math>dH = dU + d(pV).</math>

So

:<math>dH = \delta Q + V\,dp + p \,dV - p\,dV - \delta W'</math>
::<math>\,\,= \delta Q + V\,dp - \delta W'.</math>

With sign convention of physics, ''δW''' < 0, because isochoric shaft work done by an external device on the system adds energy to the system, and may be viewed as virtually adding heat. The only thermodynamic mechanical work done by the system is expansion work, ''p dV''.<ref>{{cite book|last1=Ebbing|first1=Darrel|last2=Gammon|first2=Steven|title=General Chemistry|publisher=Cengage Learning|year=2010|isbn=978-0-538-49752-7|page=231|url=https://books.google.com/books?id=8_7iGj4QLR4C&pg=PA231|url-status=live|archiveurl=https://web.archive.org/web/20131114033110/http://books.google.com/books?id=8_7iGj4QLR4C&pg=PA231|archivedate=2013-11-14}}</ref>

The system is under [[isobaric system|constant pressure]] (''dp''&nbsp;=&nbsp;0). Consequently, the increase in enthalpy of the system is equal to the added [[heat]] and virtual heat:

:<math>dH = \delta Q - \delta W'.</math>

This is why the now obsolete term ''heat content'' was used in the nineteenth century.

==Applications==
In thermodynamics, one can calculate enthalpy by determining the requirements for creating a system from "nothingness"; the mechanical work required, ''pV'', differs based upon the conditions that obtain during the creation of the [[thermodynamic system]].

[[Energy]] must be supplied to remove particles from the surroundings to make space for the creation of the system, assuming that the pressure ''p'' remains constant; this is the ''pV'' term. The supplied energy must also provide the change in internal energy, ''U'', which includes [[activation energy|activation energies]], ionization energies, mixing energies, vaporization energies, chemical bond energies, and so forth. Together, these constitute the change in the enthalpy ''U''&nbsp;+&nbsp;''pV''. For systems at constant pressure, with no external work done other than the ''pV'' work, the change in enthalpy is the heat received by the system.

For a simple system, with a constant number of particles, the difference in enthalpy is the maximum amount of thermal energy derivable from a thermodynamic process in which the pressure is held constant.<ref>{{cite book|last1=Rathakrishnan|title=High Enthalpy Gas Dynamics|publisher=John Wiley and Sons Singapore Pte. Ltd.|isbn=978-1118821893|date=2015}}</ref>

===Heat of reaction===
{{Main|Standard enthalpy of reaction}}
The total enthalpy of a system cannot be measured directly, the ''enthalpy change'' of a [[system (thermodynamics)|system]] is measured instead. Enthalpy change is defined by the following equation:

:<math>\Delta H = H_\mathrm{f} - H_\mathrm{i},</math>

where
:Δ''H'' is the "enthalpy change",
:''H''<sub>f</sub> is the final enthalpy of the system (in a chemical reaction, the enthalpy of the products),
:''H''<sub>i</sub> is the initial enthalpy of the system (in a chemical reaction, the enthalpy of the reactants).

For an [[exothermic reaction]] at constant [[pressure]], the system's change in enthalpy equals the energy released in the reaction, including the energy retained in the system and lost through expansion against its surroundings.  In a similar manner, for an [[endothermic]] reaction, the system's change in enthalpy is equal to the energy ''absorbed'' in the reaction, including the energy ''lost by'' the system and ''gained'' from compression from its surroundings. If Δ''H'' is positive, the reaction is endothermic, that is heat is absorbed by the system due to the products of the reaction having a greater enthalpy than the reactants.  On the other hand, if Δ''H'' is negative, the reaction is exothermic, that is the overall decrease in enthalpy is achieved by the generation of heat.<ref>{{cite book|first=Keith J. |last=Laidler |first2=John H.|last2=Meiser|date=1982 |title=Physical Chemistry |page=53 |isbn=978-0-8053-5682-3 |publisher=Benjamin/Cummings}}</ref>

From the definition of enthalpy as <math>H = U + pV,</math> the enthalpy change at constant pressure <math>\Delta H = \Delta U + p \Delta V.</math> However for most chemical reactions, the work term <math>p \Delta V</math> is much smaller than the internal energy change <math>\Delta U</math> which is approximately equal to <math>\Delta H.</math>  As an example, for the combustion of carbon monoxide 2 CO(g) + O<sub>2</sub>(g) → 2 CO<sub>2</sub>(g), <math>\Delta H</math> = −566.0 kJ and <math>\Delta U</math> = −563.5 kJ.<ref>{{cite book|first=Ralph H. |last=Petrucci |first2=William S.|last2=Harwood |first3=F. Geoffrey|last3=Herring |date=2002 |title=General Chemistry |url=https://archive.org/details/generalchemistry00hill |url-access=registration |edition=8th |pages=[https://archive.org/details/generalchemistry00hill/page/237 237–238] |isbn=978-0-13-014329-7|publisher=Prentice Hall}}</ref> Since the differences are so small, reaction enthalpies are often loosely described as reaction energies and analyzed in terms of [[bond energy|bond energies]].

===Specific enthalpy===
The specific enthalpy of a uniform system is defined as ''h'' = {{sfrac|''H''|''m''}} where ''m'' is the mass of the system. The [[SI unit]] for specific enthalpy is joule per kilogram. It can be expressed in other specific quantities by {{nowrap|1=''h'' = ''u'' + ''pv''}}, where ''u'' is the specific [[internal energy]], ''p'' is the pressure, and ''v'' is [[specific volume]], which is equal to {{sfrac|''ρ''}}, where ''ρ'' is the [[density]].

===Enthalpy changes===
An enthalpy change describes the change in enthalpy observed in the constituents of a thermodynamic system when undergoing a transformation or chemical reaction. It is the difference between the enthalpy after the process has completed, i.e. the enthalpy of the [[Product (chemistry)|products]], and the initial enthalpy of the system, i.e. the reactants. These processes are reversible{{why|date=March 2015}} and the enthalpy for the reverse process is the negative value of the forward change.

A common standard enthalpy change is the [[enthalpy of formation]], which has been determined for a large number of substances. Enthalpy changes are routinely measured and compiled in chemical and physical reference works, such as the [[CRC Handbook of Chemistry and Physics]]. The following is a selection of enthalpy changes commonly recognized in thermodynamics.

When used in these recognized terms the qualifier ''change'' is usually dropped and the property is simply termed ''enthalpy of 'process'''. Since these properties are often used as reference values it is very common to quote them for a standardized set of environmental parameters, or [[standard conditions]], including:
* A [[temperature]] of 25&nbsp;°C or 298.15&nbsp;K,
* A [[pressure]] of one atmosphere (1&nbsp;atm or 101.325&nbsp;kPa),
* A [[concentration]] of 1.0&nbsp;M when the element or compound is present in solution,
* Elements or compounds in their normal physical states, i.e. [[standard state]].
For such standardized values the name of the enthalpy is commonly prefixed with the term ''standard'', e.g. ''standard enthalpy of formation''.

Chemical properties:
* [[Enthalpy of reaction]], defined as the enthalpy change observed in a constituent of a thermodynamic system when one mole of substance reacts completely.
* [[Enthalpy of formation]], defined as the enthalpy change observed in a constituent of a thermodynamic system when one mole of a compound is formed from its elementary antecedents.
* [[Enthalpy of combustion]], defined as the enthalpy change observed in a constituent of a thermodynamic system when one mole of a substance burns completely with oxygen.
* [[Enthalpy of hydrogenation]], defined as the enthalpy change observed in a constituent of a thermodynamic system when one mole of an unsaturated compound reacts completely with an excess of hydrogen to form a saturated compound.
* [[Enthalpy of atomization]], defined as the enthalpy change required to atomize one mole of compound completely.
* [[Enthalpy of neutralization]], defined as the enthalpy change observed in a constituent of a thermodynamic system when one mole of water is formed when an acid and a base react.
* Standard [[Enthalpy of solution]], defined as the enthalpy change observed in a constituent of a thermodynamic system when one mole of a solute is dissolved completely in an excess of solvent, so that the solution is at infinite dilution.
* Standard enthalpy of [[Denaturation (biochemistry)]], defined as the enthalpy change required to denature one mole of compound.
* [[Hydration energy|Enthalpy of hydration]], defined as the enthalpy change observed when one mole of gaseous ions are completely dissolved in water forming one mole of aqueous ions.

Physical properties:
* [[Enthalpy of fusion]], defined as the enthalpy change required to completely change the state of one mole of substance between solid and liquid states.
* [[Enthalpy of vaporization]], defined as the enthalpy change required to completely change the state of one mole of substance between liquid and gaseous states.
* [[Enthalpy of sublimation]], defined as the enthalpy change required to completely change the state of one mole of substance between solid and gaseous states.
* [[Lattice enthalpy]], defined as the energy required to separate one mole of an ionic compound into separated gaseous ions to an infinite distance apart (meaning no force of attraction).
* [[Enthalpy of mixing]], defined as the enthalpy change upon mixing of two (non-reacting) chemical substances.

===Open systems===
In [[thermodynamic]] [[Open system (systems theory)|open systems]], mass (of substances) may flow in and out of the system boundaries. The first law of thermodynamics for open systems states: The increase in the internal energy of a system is equal to the amount of energy added to the system by mass flowing in and by heating, minus the amount lost by mass flowing out and in the form of work done by the system:

:<math>dU = \delta Q + dU_\text{in} - dU_\text{out} - \delta W,</math>

where ''U''<sub>in</sub> is the average internal energy entering the system, and ''U''<sub>out</sub> is the average internal energy leaving the system.

[[Image:First law open system.svg|250px|thumb|right|During [[Steady-state (chemical engineering)|steady, continuous]] operation, an energy balance applied to an open system equates shaft work performed by the system to heat added plus net enthalpy added]]

The region of space enclosed by the boundaries of the open system is usually called a [[control volume]], and it may or may not correspond to physical walls.  If we choose the shape of the control volume such that all flow in or out occurs perpendicular to its surface, then the flow of mass into the system performs work as if it were a piston of fluid pushing mass into the system, and the system performs work on the flow of mass out as if it were driving a piston of fluid.  There are then two types of work performed: ''flow work'' described above, which is performed on the fluid (this is also often called ''pV work''), and ''shaft work'', which may be performed on some mechanical device.

These two types of work are expressed in the equation

: <math>\delta W = d(p_\text{out}V_\text{out}) - d(p_\text{in}V_\text{in}) + \delta W_\text{shaft}.</math>

Substitution into the equation above for the control volume (cv) yields:

: <math>dU_\text{cv} = \delta Q + dU_\text{in} + d(p_\text{in}V_\text{in}) - dU_\text{out} - d(p_\text{out}V_\text{out}) - \delta W_\text{shaft}.</math>

The definition of enthalpy, ''H'', permits us to use this [[thermodynamic potential]] to account for both internal energy and ''pV'' work in fluids for open systems:

: <math>dU_\text{cv} = \delta Q + dH_\text{in} - dH_\text{out} - \delta W_\text{shaft}.</math>

If we allow also the system boundary to move (e.g. due to moving pistons), we get a rather general form of the first law for open systems.<ref>{{cite book|first1=M. J. |last1=Moran |first2=H. N. |last2=Shapiro |title=Fundamentals of Engineering Thermodynamics |edition=5th |date=2006 |publisher=John Wiley & Sons|page=129}}</ref> In terms of time derivatives it reads:

: <math>\frac{dU}{dt} = \sum_k \dot Q_k + \sum_k \dot H_k - \sum_k p_k\frac{dV_k}{dt} - P,</math>

with sums over the various places ''k'' where heat is supplied, mass flows into the system, and boundaries are moving. The ''Ḣ<sub>k</sub>'' terms represent enthalpy flows, which can be written as

:<math>\dot H_k = h_k\dot m_k = H_\mathrm{m}\dot n_k,</math>

with ''ṁ<sub>k</sub>'' the mass flow and ''ṅ<sub>k</sub>'' the molar flow at position ''k'' respectively. The term {{sfrac|''dV''<sub>''k''</sub>|''dt''}} represents the rate of change of the system volume at position ''k'' that results in ''pV'' power done by the system. The parameter ''P'' represents all other forms of power done by the system such as shaft power, but it can also be e.g. electric power produced by an electrical power plant.

Note that the previous expression holds true only if the kinetic energy flow rate is conserved between system inlet and outlet.{{clarify|reason=This new type of energy, kinetic energy, was not mentioned before. Is it part of U? Does it need to be conserved, or just the net flow across boundary be zero?|date=March 2015}} Otherwise, it has to be included in the enthalpy balance. During [[Steady-state (chemical engineering)|steady-state]] operation of a device (''see [[turbine]], [[pump]], and [[engine]]''), the average {{sfrac|''dU''|''dt''}} may be set equal to zero. This yields a useful expression for the average [[Power (physics)|power]] generation for these devices in the absence of chemical reactions:

:<math> P = \sum_k \left\langle \dot Q_k \right\rangle
+ \sum_k \left\langle \dot H_k \right\rangle
- \sum_k \left\langle p_k\frac{dV_k}{dt} \right\rangle,</math>

where the [[angle bracket]]s denote time averages. The technical importance of the enthalpy is directly related to its presence in the first law for open systems, as formulated above.

==Diagrams==
[[File:Ts diagram of N2 02.jpg|500px|thumb|right|''T''–''s'' diagram of nitrogen.<ref>Figure composed with data obtained with [[RefProp]], NIST Standard Reference Database 23.</ref> The red curve at the left is the melting curve. The red dome represents the two-phase region with the low-entropy side the saturated liquid and the high-entropy side the saturated gas. The black curves give the ''T''–''s'' relation along isobars. The pressures are indicated in bar. The blue curves are isenthalps (curves of constant enthalpy). The values are indicated in blue in kJ/kg. The specific points '''a''', '''b''', etc., are treated in the main text.]]

The enthalpy values of important substances can be obtained using commercial software. Practically all relevant material properties can be obtained either in tabular or in graphical form. There are many types of diagrams, such as ''h''–''T'' diagrams, which give the specific enthalpy as function of temperature for various pressures, and ''h''–''p'' diagrams, which give ''h'' as function of ''p'' for various ''T''. One of the most common diagrams is the temperature–specific entropy diagram (''T''–''s''-diagram). It gives the melting curve and saturated liquid and vapor values together with isobars and isenthalps. These diagrams are powerful tools in the hands of the thermal engineer.

===Some basic applications===
The points '''a''' through '''h''' in the figure play a role in the discussion in this section.
:'''a''': ''T'' = 300&nbsp;K, ''p'' = 1&nbsp;bar, ''s'' = 6.85&nbsp;kJ/(kg&nbsp;K), ''h'' = 461&nbsp;kJ/kg;
:'''b''': ''T'' = 380&nbsp;K, ''p'' = 2&nbsp;bar, ''s'' = 6.85&nbsp;kJ/(kg&nbsp;K), ''h'' = 530&nbsp;kJ/kg;
:'''c''': ''T'' = 300&nbsp;K, ''p'' = 200&nbsp;bar, ''s'' = 5.16&nbsp;kJ/(kg&nbsp;K), ''h'' = 430&nbsp;kJ/kg;
:'''d''': ''T'' = 270&nbsp;K, ''p'' = 1&nbsp;bar, ''s'' = 6.79&nbsp;kJ/(kg&nbsp;K), ''h'' = 430&nbsp;kJ/kg;
:'''e''': ''T'' = 108&nbsp;K, ''p'' = 13&nbsp;bar, ''s'' = 3.55&nbsp;kJ/(kg&nbsp;K), ''h'' = 100&nbsp;kJ/kg (saturated liquid at 13&nbsp;bar);
:'''f''': ''T'' = 77.2&nbsp;K, ''p'' = 1&nbsp;bar, ''s'' = 3.75&nbsp;kJ/(kg&nbsp;K), ''h'' = 100&nbsp;kJ/kg;
:'''g''': ''T'' = 77.2&nbsp;K, ''p'' = 1&nbsp;bar, ''s'' = 2.83&nbsp;kJ/(kg&nbsp;K), ''h'' = 28&nbsp;kJ/kg (saturated liquid at 1&nbsp;bar);
:'''h''': ''T'' = 77.2&nbsp;K, ''p'' = 1&nbsp;bar, ''s'' = 5.41&nbsp;kJ/(kg&nbsp;K), ''h'' = 230&nbsp;kJ/kg (saturated gas at 1&nbsp;bar);

===Throttling===
{{main|Joule–Thomson effect}}
[[File:Schematic of throttling.png|thumb|right|Schematic diagram of a throttling in the steady state. Fluid enters the system (dotted rectangle) at point 1 and leaves it at point 2. The mass flow is ''ṁ''.]]

One of the simple applications of the concept of enthalpy is the so-called throttling process, also known as [[Joule–Thomson effect|Joule-Thomson expansion]]. It concerns a steady adiabatic flow of a fluid through a flow resistance (valve, porous plug, or any other type of flow resistance) as shown in the figure. This process is very important, since it is at the heart of domestic refrigerators, where it is responsible for the temperature drop between ambient temperature and the interior of the refrigerator. It is also the final stage in many types of liquefiers.

For a steady state flow regime, the enthalpy of the system (dotted rectangle) has to be constant. Hence

:<math>0 = \dot m h_1 - \dot m h_2.</math>

Since the mass flow is constant, the specific enthalpies at the two sides of the flow resistance are the same:

:<math>h_1 = h_2,</math>

that is, the enthalpy per unit mass does not change during the throttling. The consequences of this relation can be demonstrated using the ''T''–''s'' diagram above. Point '''c''' is at 200&nbsp;bar and room temperature (300&nbsp;K). A Joule–Thomson expansion from 200&nbsp;bar to 1&nbsp;bar follows a curve of constant enthalpy of roughly 425&nbsp;kJ/kg (not shown in the diagram) lying between the 400 and 450&nbsp;kJ/kg isenthalps and ends in point '''d''', which is at a temperature of about 270&nbsp;K. Hence the expansion from 200&nbsp;bar to 1&nbsp;bar cools nitrogen from 300&nbsp;K to 270&nbsp;K. In the valve, there is a lot of friction, and a lot of entropy is produced, but still the final temperature is below the starting value!

Point '''e''' is chosen so that it is on the saturated liquid line with {{nowrap|1=''h'' = 100 kJ/kg}}. It corresponds roughly with {{nowrap|1=''p'' = 13 bar}} and {{nowrap|1=''T'' = 108 K}}. Throttling from this point to a pressure of 1&nbsp;bar ends in the two-phase region (point '''f'''). This means that a mixture of gas and liquid leaves the throttling valve. Since the enthalpy is an extensive parameter, the enthalpy in '''f''' (''h''<sub>'''f'''</sub>) is equal to the enthalpy in '''g''' (''h''<sub>'''g'''</sub>) multiplied by the liquid fraction in '''f''' (''x''<sub>'''f'''</sub>) plus the enthalpy in '''h''' (''h''<sub>'''h'''</sub>) multiplied by the gas fraction in '''f''' {{nowrap|(1 − ''x''<sub>'''f'''</sub>)}}. So

:<math> h_\mathbf{f} = x_\mathbf{f} h_\mathbf{g} + (1 - x_\mathbf{f})h_\mathbf{h}.</math>

With numbers: {{nowrap|1=100 = ''x''<sub>'''f'''</sub> × 28 + (1 − ''x''<sub>'''f'''</sub>) × 230}}, so ''x''<sub>'''f'''</sub>&nbsp;=&nbsp;0.64. This means that the mass fraction of the liquid in the liquid–gas mixture that leaves the throttling valve is 64%.

===Compressors===
{{main|Gas compressor}}
[[File:Schematic of compressor.png|thumb|right|Schematic diagram of a compressor in the steady state. Fluid enters the system (dotted rectangle) at point 1 and leaves it at point 2. The mass flow is ''ṁ''. A power ''P'' is applied and a heat flow ''Q̇'' is released to the surroundings at ambient temperature ''T''<sub>a</sub>.]]

A power ''P'' is applied e.g. as electrical power. If the compression is [[adiabatic]], the gas temperature goes up. In the reversible case it would be at constant entropy, which corresponds with a vertical line in the ''T''–''s'' diagram. For example, compressing nitrogen from 1 bar (point '''a''') to 2 bar (point '''b''') would result in a temperature increase from 300 K to 380 K. In order to let the compressed gas exit at ambient temperature ''T''<sub>a</sub>, heat exchange, e.g. by cooling water, is necessary. In the ideal case the compression is isothermal. The average heat flow to the surroundings is ''Q̇''. Since the system is in the steady state the first law gives

:<math>0 = -\dot Q + \dot m h_1 - \dot m h_2 + P.</math>

The minimal power needed for the compression is realized if the compression is reversible. In that case the [[second law of thermodynamics]] for open systems gives

:<math>0 = -\frac{\dot Q}{T_\mathrm{a}} + \dot m s_1 - \dot m s_2.</math>

Eliminating ''Q̇'' gives for the minimal power

:<math>\frac{P_\text{min}}{\dot m} = h_2 - h_1 - T_\mathrm{a}(s_2 - s_1).</math>

For example, compressing 1&nbsp;kg of nitrogen from 1&nbsp;bar to 200&nbsp;bar costs at least {{nowrap|1=(''h''<sub>'''c'''</sub> − ''h''<sub>'''a'''</sub>) − ''T''<sub>a</sub>(''s''<sub>'''c'''</sub> − ''s''<sub>'''a'''</sub>)}}. With the data, obtained with the ''T''–''s'' diagram, we find a value of {{nowrap|1=(430 − 461) − 300 × (5.16 − 6.85) =}} 476&nbsp;kJ/kg.

The relation for the power can be further simplified by writing it as

:<math>\frac{P_\text{min}}{\dot m} = \int_1^2(dh - T_\mathrm{a}\,ds).</math>

With {{nowrap|1=''dh'' = ''T''&thinsp;''ds'' + ''v''&thinsp;''dp''}}, this results in the final relation

:<math>\frac{P_\text{min}}{\dot m} = \int_1^2 v\,dp.</math>

==See also==
* [[Standard enthalpy change of formation (data table)]]
* [[Calorimetry]]
* [[Calorimeter]]
* [[Departure function]]
* [[Hess's law]]
* [[Isenthalpic process]]
* [[Stagnation enthalpy]]
* [[Thermodynamic databases for pure substances]]

==Notes==
{{Reflist|group=note}}

==References==
{{Reflist|30em}}

==Bibliography==
* {{cite journal|url=http://www.dwc.knaw.nl/DL/publications/PU00013601.pdf |first=J.P. |last=Dalton |title=Researches on the Joule–Kelvin effect, especially at low temperatures. I. Calculations for hydrogen |journal=KNAW Proceedings |volume=11 |pages=863–873 |date=1909|bibcode=1908KNAB...11..863D }}
* {{cite book|last=Haase |first=R. |title=Physical Chemistry: An Advanced Treatise |editor-last=Jost |editor-first=W. |publisher=Academic |location=New York |date=1971 |page=29}}
* {{cite book|last=Gibbs |first=J. W. |title=The Collected Works of J. Willard Gibbs, Vol. I |publisher=Yale University Press |location=New Haven, CT |edition=1948 |page=88}}
* {{cite journal|doi=10.1021/ed079p697 |first=I. K. |last=Howard |title=''H'' Is for Enthalpy, Thanks to Heike Kamerlingh Onnes and Alfred W. Porter |journal=[[J. Chem. Educ.]] |volume=79 |issue=6 |pages=697–698 |date=2002|bibcode = 2002JChEd..79..697H }}
* {{cite book|last=Laidler |first=K. |title=The World of Physical Chemistry |url=https://archive.org/details/worldofphysicalc0000laid |url-access=registration |publisher=Oxford University Press |location=Oxford |date=1995 |page=[https://archive.org/details/worldofphysicalc0000laid/page/110 110]}}
* {{cite book|first1=C. |last1=Kittel |first2=H. |last2=Kroemer |title=Thermal Physics |publisher=S. R. Furphy & Co. |location=New York |date=1980 |page=246}}
* {{Cite journal|last=DeHoff |first=R. |title=Thermodynamics in Materials Science |journal=Entropy |volume=20 |issue=7 |pages=532 |edition=2nd |date=2006|bibcode=2018Entrp..20..532G |doi=10.3390/e20070532 }}

==External links==
* [http://scienceworld.wolfram.com/physics/Enthalpy.html Enthalpy] – Eric Weisstein's World of Physics
* [http://hyperphysics.phy-astr.gsu.edu/hbase/thermo/firlaw.html Enthalpy] – Georgia State University
* [https://web.archive.org/web/20061010093705/http://www.chem.tamu.edu/class/majors/tutorialnotefiles/enthalpy.htm Enthalpy example calculations] – Texas A&M University Chemistry Department

{{HVAC}}

[[Category:State functions]]
[[Category:Concepts in physics]]
[[Category:Enthalpy| ]]
[[Category:Energy (physics)]]
[[Category:Physical quantities]]